AEM Water Electrolyzer is divided into cathode and anode chambers, with the core configuration being the MEA. The MEA achieves zero-gap ion transport by pressing together the GDL, catalyst layer, and anion exchange membrane. The anion exchange membrane is the core component of AEM technology, with the main functions of conducting hydroxide ions (OH⁻) while preventing direct transfer of gas and electrons between electrodes.

Characteristic:

1. MEA needs to be produced by hot pressing. Hot pressing can significantly improve the interfacial contact between the electrode and the membrane, reduce contact resistance, and enhance performance and long-term stability.Research shows that to achieve the ideal hot-pressing effect, the hot-pressing temperature should be set between 150-250°C, the pressure between 0.5 MPa and 2.5 MPa, and the time between 2-10 minutes. Hot-pressing parameters need to be optimized based on the specific ion membrane material and electrode structure, and it is recommended to conduct parameter screening experiments before formal testing.

2. AEM electrolysis water testing also requires heating. Research shows that 60-80°is the ideal temperature condition. Users need to prepare Φ6mm heating rods (heating plates) and Φ2mm thermocouple.

Parameter:

1.The electrode plate can be used as an end plate, a channel plate and a current collector, which can be quickly assembled and disassembled, and is easy to clean.

2.The default plate material is nickel, and it supports customized nickel plated with gold, etc.

3.The channel shape is serpentine S channel by default, and it supports customized parallel, cross-finger, dot matrix, multi-S channel, etc.

4.The channel width and depth are 1.5mm by default, and support customized 0.5mm, 1mm, 2mm, etc.

5.The area includes 1cm2, 4cm2, 5cm2, 9cm2, 16cm2, 25cm2, 50cm2, 100cm2, etc.

6.There are two kinds of gaskets: PTFE gasket and fluorine gasket. It is important that the user informs the name and thickness of the electrode material to be used in order to equip it with a suitable gasket.

Specification:
body material：99.9% Nickel
channel shape: S-type channel
channel width:1.5mm
channel depth:1.5mm
number of channels:9
Diameter of the heating rod hole:6.2mm
Diameter of the thermocouple hole:2.2mm

Product Includes:

1 * Electrolyzer
1 * PTFE tube cutter
1 * φ3mm PTFE tube
4 * PU quick connector φ3mm
4 * PTFE quick connector φ3mm
4 * Positioning rod
2 * Allen key+spacer
1 * Gear wrench
6 * Plate fixing rod
6 * Conductive current collector fixing rod
4 * Conductive current collector
6 * PEEK sealing screw M8/M7
6 * PEEK sealing screw M7
4 * φ3mm solid PTFE rod
1 * PEEK insulating plug
1 * PTFE film tape
2 * Built-in sealing o-ring
30 * Sealing gasket

References: